Replacement Wireless Microphones for WinBridge Voice Amplifiers

Lost, broke or wore out the microphone that came with your WinBridge voice amplifier? You do not need to replace the whole system — just the mic. These are plug-and-play UHF replacement wireless microphones made to pair with WinBridge amplifiers, so you are back up and running in seconds. The only thing that matters when buying a replacement is compatibility with your exact model — the table below shows which mic fits which amplifier.

Which replacement microphone fits your amplifier?

Not sure which one you need? Replacement mics pair by UHF frequency and connector, so they are model-specific. Check the model printed on your amplifier, and if your exact model is not listed above, message us before ordering and we will confirm the right fit.

Headset or handheld — which replacement should you pick?

• Headset (S17) — hands-free, keeps a steady distance from your mouth. Best for teachers, presenters and anyone who moves while they talk.
• Handheld (S16) — easy to pass around. Best for singing, hosting, and letting others speak or answer questions.

Many WinBridge amplifiers can run more than one mic, so a replacement can also serve as a spare or a second mic for duets, co-teaching and Q&A — not only a like-for-like swap.

How to replace and pair your wireless mic

1. Confirm your amplifier model against the table above and order the matching mic.
2. Power on both the amplifier and the new mic — UHF mics are pre-set to pair on the correct channel.
3. Insert a fresh battery or charge the mic, raise the mic volume, and test.
4. If you run two mics, set both going before your session so a second voice is ready.

Prefer a wired backup? Most WinBridge amplifiers also accept a wired mic via their 3.5 mm or 6.35 mm ports, which is a handy universal fallback if a wireless mic is ever unavailable.

Replacement microphone FAQ

Can I replace just the wireless microphone instead of the whole amplifier?

Yes. WinBridge sells the wireless mics separately, so if yours is lost, broken or worn, you replace only the mic. Choose the model that matches your amplifier from the compatibility table above.

How do I know which replacement mic fits my WinBridge amplifier?

Match the model printed on your amplifier to the table above: the S17 headset fits the S93/S95/S97/S98, and the S16 handheld fits the S93 Pro/S95/S97/S98 Pro/S99/S100/S100 Pro. If your model is not listed, contact us to confirm before ordering.

Do WinBridge replacement microphones need pairing or setup?

No complex setup. The UHF mics are pre-set to the correct channel, so you power on the amplifier and the mic, raise the mic volume, and you are ready — genuinely plug-and-play.

Can I use a replacement mic as a second microphone?

Often, yes. Many WinBridge amplifiers support more than one wireless mic, so a compatible replacement can double as a spare or a second mic for duets, co-teaching, panels and Q&A.